HIGH-DEFINITION MWIR SCIENCE-GRADE CAMERA
FLIR X8580-HS InSb™
The FLIR X8580-HS InSb midwave IR camera is designed for scientists and engineers who need to capture detailed imagery of high-speed events, perform custom radiometric measurements, or detect points of failure in composites, solar cells, and electronics. This thermal imaging camera combines 1280 × 1024 HD resolution with fast frame rates and integration times, allowing researchers to record stop motion on fast-moving subjects or rapid temperature changes—whether in the lab or on the test range. With a four-position motorized filter wheel and support for FLIR motorized focus lenses, the X8580-HS InSb will provide higher quality recordings, save time, and mitigate frustration in dynamic acquisition environments.
FULL FRAME RATE STREAMING
Experience unmatched image clarity and speed with 10 GigE, CXP 2.1 high-speed interfaces or Camera Link Full.
EEXTENCE EXTENDED SSD RECORDING
Capture more than two hours of detailed thermal events directly to a 4 TB SSD with zero dropped frames.
PRECISE TIMING SYSTEM
Proprietary triggering, synchronization, and accurate IRIG time stamping system ensures precise on-time recording.
SPECIFICATIONS
Specifications |
FLIR X8580-HS InSb™ |
|
---|---|---|
Resolution | 1280 × 1024 | |
Detector Pitch | 12 µm | |
Spectral Range | 1.5 – 5.0 µm | |
Detector Type | FLIR Indium Antimonide (InSb) | |
Camera f-number | f/2.5 | |
Dynamic Range | 14-bit | |
Frame Rate [Full Window] | Programmable; approx. 0.5 Hz to 181 Hz | |
Integration Time | 270 ns to approx. Full Frame | |
Standard Temperature Range [with band matched optics] | -20°C to 300°C (-4°F to 572°F) | |
Optional Temperature Range [with band matched optics] | 45°C to 600°C (ND1) 250°C to 2000°C (ND2) 500°C to 3000°C (ND3) |
|
Filtering | 4-position motorized filter wheel, standard 1-inch filters, user swappable | |
Focus | Motorized (compatible w/ manual) | |
Imaging & Optical | ||
Available Lenses | Manual (broadband): 25 mm, 50 mm, 100 mm Motorized (broadband): 25 mm, 50 mm, 100 mm |
|
Camera f-number | f/2.5 | |
Camera size excl lens (L x W x H) | 249 mm × 157 mm × 147 mm (9.8 in × 6.2 in × 5.8 in) | |
Close-up Lenses/Microscopes | No microscopes available | |
Detector Pitch | 12 µm | |
Detector Type | FLIR Indium Antimonide (InSb) | |
Digital Zoom | 1x, Auto (best fit) | |
Direct to SSD Recording | Direct to SSD Recording Yes, removable 4 TB NVMe SSD included, approx. 2-hours of zero dropped frames record timeOn-Camera Image Storage RAM (volatile): 64 GB, up to 23,000 frames full frame NVMe U.2 SSD (user-removable/non-volatile): 4 TB U.2 SSD included, up to 1.4 M frames full frame |
|
Dynamic Range | 14-bit | |
Filtering | 4-position motorized filter wheel, standard 1-inch filters, user swappable | |
Focus | Motorized (compatible w/ manual) | |
Frame Rate [Full Window] | Programmable; approx. 0.5 Hz to 181 Hz | |
Image Time Stamp | Internal precision timestamp. IRIG-B AM decoder, TSPI accurate, Free wheel if sync signal is lost | |
Integration Time | 270 ns to approx. Full Frame | |
Lens Interface | FLIR FPO-M (4-tab bayonet, motorized) | |
Operability | ≥99.5% (≥99.9% typical) | |
Overlay | Customizable with the ability to toggle off | |
Palette | Selectable 8-bit | |
Pixel Clock | 355.2 MHz | |
Radiometric Data Streaming | Simultaneous 10 Gigabit Ethernet (GigE Vision), Camera Link, CoaXPress (CXP 2.1) Single link @ 10 Gbps or Dual Link @ 5 Gbps | |
Readout Modes | Asynchronous Integrate While Read; Asynchronous Integrate Then Read | |
Readout Type | Snapshot | |
Resolution | 1280 × 1024 | |
Sensor Cooling | Linear Sterling Cooler | |
Spectral Range | 1.5 – 5.0 µm | |
Standard Video | HDMI, SDI | |
Subwindow Modes | Flexible windowing down to 64 × 4 (steps of 64 columns, 2 rows) | |
Thermal Sensitivity_NETD [typical] | 30 mK typical | |
Video Modes | HD-SDI: 720p@50/59.9 Hz, 1080p@25/29.9 Hz, 1080p@60 Hz SD-SDI: 480i@60 Hz, 576i@50 Hz |
|
Measurement & Analysis | ||
Accuracy | ≤100°C ±2°C (±1°C typical), ≥100°C ±2% of reading (±1% typical) | |
Automatic Gain Control | Manual, Linear, Plateau equalization, DDE | |
Optional Temperature Range [with band matched optics] | 45°C to 600°C (ND1) 250°C to 2000°C (ND2) 500°C to 3000°C (ND3) |
|
Standard Temperature Range [with band matched optics] | -20°C to 300°C (-4°F to 572°F) | |
General | ||
Synchronization Modes | Sync In, Sync Out, Tri-Level Sync, Video Sync | |
Trigger Mode(s) | Trigger In, Software generated, Time generated | |
Weight [without lens] | 6.35 kg (14 lbs) | |
Power | 24 VDC (≤50 W steady state) | |
Mounting | 2 × ¼ in. -20, 1 × 3/8 in. -16, 4 × #10 -24, Side: 3 × ¼ in. -20 (each side) | |
Operating Temperature Range | -20°C to 50°C (-4°F to 122°F) |