Scion PTM

MIDWAVE INFRARED THERMAL CAMERA

FLIR A6780 MWIR

The FLIR A6780 MWIR camera system makes it easy to measure temperatures of rapid thermal events and fast-moving targets, making it an ideal choice for industrial, military, and manufacturing R&D applications. This affordable, cooled InSb camera offers the flexibility of both manual and remote-focus lens options to maximize the number of measurement pixels on the object of interest. And single cable connectivity using Gigabit Ethernet provides complete camera control plus data capturing in FLIR Research Studio software – so users can analyze and understand data faster than ever before.

SIMPLIFIED ANALYSIS & SHARING

FLIR Research Studio’s simple Connect–View–Record–Analyze workflow helps you collect and analyze data quickly and collaborate with your team easily.

SIMPLE CONNECTIONS, MINIMAL RAMP-UP TIME

The 327,680 (640 x 512) pixel detector offers three user-selectable, 75x factor gain states for imaging bright and low-light scenes

MEASURE TEMPERATURE ACCURATELY

Offers sub-windowed frame rates up to 4,130 Hz, a suite of lens options, and a built-in 3-position warm filter wheel to quickly switch between standard and high-temperature ranges.

MODELS AND SPECIFICATIONS

Model Number

A6780

A6781

A6782

A6783

Detector Type FLIR indium antimonide (InSb)  
Spectral Range 1.0 – 5.0 µm 3.0 – 5.0 µm 1.0 – 5.0 µm  3.0 – 5.0 µm 
Resolution 640 × 512  
Pixel Size 15 µm 
Thermal Sensitivity / NETD ≤25 mK typical ≤20 mK typical ≤25 mK typical ≤20 mK typical
Operability ≥99.8% (≥99.95% typical)
Sensor Cooling Closed-cycle rotary
Readout Electronics
Readout Snapshot 
Readout Modes Asynchronous integrate while read, asynchronous integrate then read 
Image Time Stamp Yes
Integration Time 480 ns to ~full frame 
Pixel Clock 50 MHz 
Frame Rate (Full Window) Programmable; 0.0015 Hz to 125 Hz
Subwindow Mode Flexible windowing down to 16 × 4 (steps of 16 columns, 4 rows)
Camera Electronics
Synchronization Modes Internal, external, video 
Sync In/Sync Out Connection Sync In (via Rear Panel), Sync Out (via Aux Cable) 
Trigger Input Yes (via AUX breakout cable) 
Superframing/DRX Yes
Max Frame Rate (Min Window) 4,130 Hz (16 x 4 sub-window)
Dynamic Range 14-bit
On-Camera Image Storage None 
Radiometric Data Streaming Gigabit Ethernet (GigE Vision) 
Standard Video SDI
Command and Control GenICam (GigE), RS-232
Integration Active Output Yes (via AUX breakout cable)
Lock-in Signals Input Optional (via AUX breakout cable)
Record Start Input Yes (via AUX breakout cable)
Measurement
Standard Temperature Range [with band-matched optics] -20°C to 300°C -20°C to 350°C

Microscope Lenses: -10°C to 350°C

-20°C to 350°C -20°C to 350°C,

Microscope Lenses: -10°C to 350°C

Optional Temperature Range [with band-matched optics 45°C to 600°C/113°F to 1112°F (ND1); 250°C to 2000°C/482°F to 3632°F (ND2); 500°C to 3000°C/932°F to 5432°F (ND3) 
Accuracy ≤100°C (≤212°F), ±2°C (±3.6°F) accuracy (±1°C/1.8°F typical); >100°C ±2% of reading (±1% typical) 
Ambient Drift Compensation [with factory calibration] Yes
Optics
Camera f/# f/2.5
f/4.0
Available Lenses Manual (broadband): 25 mm, 50 mm, 100 mm Manual (3-5 µm): 17 mm, 25 mm, 50 mm, 100 mm, 200 mm

Motorized (3-5 µm): 17 mm, 25 mm, 50 mm, 100 mm, 200 mm

Manual (broadband): 25 mm, 50 mm, 100 mm  Manual (3-5 µm): 17 mm, 25 mm, 50 mm, 100 mm, 200 mm

Motorized (3-5 µm): 17 mm, 25 mm, 50 mm, 100 mm, 200 mm 

Close-up Lenses / Microscopes No microscopes available  1X, 3X No microscopes available  1X, 3X
Lens Interface FLIR FPO-M (4-tab bayonet, motorized)
Focus Motorized (compatible w/ manual)
Filter Holder [Warm] 3-position motorized filter wheel (1-inch diameter filters), factory installed only
Image / Video Presentation
Palettes Selectable 8-bit 
Automatic Gain Control Manual, linear, plateau equalization, DDE 
Overlay Fixed configuration, can be turned off 
Video Modes SDI: 720p at 50/59.9 Hz, 1080p at 25/29.9 Hz
Standard Video Zoom Automatic, best fit
General
Operating Temperature Range -20°C to 50°C (-4°F to 122°F)
Power 24 VDC (< 24 W steady state)
Weight w/o Lens 2.3 kg (5 lbs)
Size [L × W × H] w/o Lens 226 × 102 × 109 mm (8.9 × 4.0 × 4.3 in)
Mounting 2 × ¼”-20 tapped holes, 1 × 3/8”-16 tapped hole, 4 × 10-24 tapped holes